|
Bigger is better. Borrowing large, robust components (fuel injectors, starter motors, drive shafts, to name a few) from the 225 and 250 HP Evinrude E-TEC's to make these new Evinrude E-TEC engines, ensures durability and long life. 60° V6 with 2.6 liters of displacement that's significantly lighter than most competitive engines means faster acceleration and higher top speeds. Choose your instruments. No interference. Power to spare. Don't get swamped. Quiet pistons. Perfect power all the time. More torque, more fun. No Maintenance hassles.
| ||||||||||||||||||||||||||||||||||
Evinrude 200 hp Outboard Specifications | |
| Shaft Length | 20/25 in. |
| Dry Weight | 419/427 lbs. |
| Type | Loop Charged V6 60o E-TEC D.I. |
| Bore and Stroke | 3.600 in x 2.588 in |
| Displacement | 158 cui |
| Starting | Electric |
| Trim Method | FasTrak Power Trim and Tilt |
| Rated Power | 200 hp @ 5,350 RPM |
| Full Throttle RPM Range | 4,850-5,850 RPM |
| Gear Ratio | 1.86:1/1.85:1 |
| Fuel Induction | E-TEC Direct Fuel Injection with stratified low RPM combustion Mode |
| Alternator | Variable Voltage Computer Controlled 133 Amp/1800 watt output with Regulator |
| Cooling System | Pressure and Temperature Controlled Water Cooled |
| Steering | Remote |
| Limited Factory Warranty | 3 Years Non-Declining |
| Emissions Compliance | CARB 3-STAR / EPA |
Financing is available on all Evinrude Outboard purchases. Contact Us! for more information on how to purchase your new Evinrude Outboard!
We wish to properly service and support the products we sell. For this reason, Alaska Mining & Diving Supply does not sell Evinrude Outboard outside of Alaska! If you are outside Alaska use the Evinrude Outboard Dealer Locator to find the dealer nearest you.
www.evinrude.com