3-Way Panel Switch Rule 45 Rule model 45 3-Way Panel Switch is similar to the Deluxe Panel Switch (RUL-41) but without indicator light or fuse holder. The Manual position has a fail-safe spring return to Off so you can't leave your pump running by accident. Black stainless steel panel. 12V, 24V, or 32V DC.  

3-Way Panel Switch Rule 41 The Rule model 41 3-Way Panel Lighted Switch controls any pump equipped with an automatic float switch. Switch toggle has three positions: Automatic, Off and Manual. Switch has a spring return to Off from the manual position. Panel is black stainless steel and has red indicator light and fuse holder. 12 volts DC.  

Rule-a-Matic Float Switch 35F The Rule-A-Matic switch will make any submersible bilge pump with a 14 amp maximum current draw, automatic. It can also be used to turn on high water alarm systems and engine driven pumps with electrical clutches. Include a fuse holder. 

Attwood Automatic Float Switch Features Model Number: 4202-7 Rated Voltage: 12- and 24-volt, CE rated Compact, low-profile design Mounts on any surface from horizontal up to a 24-degree angle Incorporates a reliable mechanical switch that actuates pump motor at 2-in water level Wire leads do not flex or hinge with the float Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference Sealed switch mechanism resists moisture, fume ignition and electrical shock Contains no mercury Installs directly onto the rear slots of the V-Series pump bracket Features a convenient test knob to test pump operation 36-in wire. 

Rule Bilge Pump 800 20F Output at 0ft.: 800 gph Hose size: 3/4" I.D. Amp Draw: 2.8 Fuse Size: 5-amp Height: 4" Voltage: 12 VDC Rule's Cartridge Series of Bilge Pumps offers traditional operation activated by a float or panel switch. These are non-automatic pumps with the added option of replacement motors. This feature allows you to carry a spare motor, providing an extra level of security and protection. Removal of the motor cartridge also allows for easy cleaning of the strainer and impeller area in the event that the pump becomes clogged with debris. Replacement motors are sold separately. 

Sahara Automatic Bilge Pump Output at 0ft.: 500 gph Output at 3.3ft.: 350 gph Hose size: 3/4" I.D. Amp Draw: 1.5 Fuse Size: 2-amp Height: 4" Voltage: 12 VDC Attwood has designed a line of automatic bilge pumps with a single focus: unsurpassed durability and performance in a compact design. The Sahara series of automatic bilge pumps come equipped with non-mercury, non-toxic float switches. These pumps are durable and easy to install. Sahara pumps feature an improved pump chamber and motor housing. All pumps in the Sahara series are 5-1/2" L x 3-1/4" W x 4" H. 

Sahara Automatic Bilge Pump Output at 0ft.: 1100 gph Output at 3.3ft.: 973 gph Hose size: 1-1/8" I.D. Amp Draw: 4 Fuse Size: 6-amp Height: 4 Voltage: 12 VDC Attwood has designed a line of automatic bilge pumps with a single focus: unsurpassed durability and performance in a compact design. The Sahara series of automatic bilge pumps come equipped with non-mercury, non-toxic float switches. These pumps are durable and easy to install. Sahara pumps feature an improved pump chamber and motor housing. All pumps in the Sahara series are 5-1/2" L x 3-1/4" W x 4" H. 

Attwood Tsunami Bilge Pump 800 Output at 0ft.: 800 gph Output at 3.3ft.: 660 gph Hose size: 3/4" I.D. Amp Draw: 3 Fuse Size: 4-amp Height: 4-3/8" Voltage: 12 VDC Color: Blue and White Made of premium materials with cool running motors, watertight seals and waterproof wiring..together, they ensure a longer life. Motor cartridges are replaceable, so boaters can simply remove a cartridge that has reached the end of its useful life and insert another. Improved motor and seal for longer life.  

Attwood Tsunami Bilge Pump Output at 0ft.: 1200gph Output at 3.3ft.: 900gph Hose size: 1-1/8" Amp Draw: 3.5 Fuse Size: 5 amp Height: 4-3/8" Voltage: 12 VDC Color: White and Grey Made of premium materials with cool running motors, watertight seals and waterproof wiring..together, they ensure a longer life. Motor cartridges are replaceable, so boaters can simply remove a cartridge that has reached the end of its useful life and insert another. Improved motor and seal for longer life.  

Attwood V500 Bilge Pump Designed for recreational boats up to 17' in length with 12V system. Our most compact pump delivers over 500 GPH at open flow and 350 GPH at a 3.3' head while drawing only 1.4amps. Compact 3-5/16" height allows installation under I/O engines. Twist-lock construction allows powerhead to be removed from pump base for easy impeller cleaning. Multi-position mounting bracket included for simple installation to horizontal or vertical surface. For 3/4" I.D. hose. Meets ABYC, US Coast Guard, and ISO standards. 

Attwood V900 Bilge Pump Designed for recreational boats up to 24' in length with 12V system. Delivers a true 900 GPH at open flow and 755 GPH at a 3.3' head. Compact 4-3/32" height allows installation under I/O engines. Twist-lock construction allows powerhead to be removed from pump base for easy impeller cleaning. Multi-position mounting bracket included for simple installation to horizontal or vertical surface. For 1-1/8" I.D. hose. Meets ABYC, US Coast Guard, and ISO standards. 

Attwood V1250 Bilge Pump Designed for recreational boats over 24' in length with 12V system. Delivers a true 1250 GPH at open flow, 940 GPH at a 3.3' head while drawing less than 3 amps. Compact 4-29/32" height allows installation under I/O engines. Twist-lock construction allows powerhead to be removed from pump base for easy impeller cleaning. Multi-position mounting bracket included for simple installation to horizontal or vertical surface. For 1-1/8" I.D. hose. Meets ABYC, US Coast Guard, and ISO standards. 

Rule Bilge Pump 500 Output at 0ft.: 500 gph Output at 3.3ft.: 360 gph Hose size: 3/4" I.D. Amp Draw: 1.9 Fuse Size: 2.5-amp Height: 4" Voltage: 12 VDC The Rule-Mate series of Automated Bilge Pumps feature both a pump and non-mercury float switch in a single, compact housing. When the float rises, the pump turns on. The pump remains on until the float drops and the pump senses no load against the impeller. Since there is no on/off cycling, there is no power wasted until the pump activates. 

Rule Bilge Pump 500 25S Output at 0ft.: 500 gph Hose size: 3/4" I.D. Amp Draw: 1.9 Fuse Size: 2.5-amp Height: 4" Voltage: 12 VDC Rule Automatic Bilge Pumps feature computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes to sense for water. If water is present, the pump will sense resistance and continue to run until all the water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal. 

Rule Bilge Pump 1100 27S Output at 0ft.: 1100 gph Hose size: 1-1/8"I.D. Amp Draw: 3.3 Fuse Size: 6-amp Height: 4-1/2" Voltage: 12 VDC Rule Automatic Bilge Pumps feature computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes to sense for water. If water is present, the pump will sense resistance and continue to run until all the water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal. 

Rule Bilge Pump 500 25D Output at 0ft.: 500 gph Hose size: 3/4" I.D. Amp Draw: 1.9 Fuse Size: 2.5-amp Height: 3-1/2" Voltage: 12 VDC Rule's Cartridge Series of Bilge Pumps offers traditional operation activated by a float or panel switch. These are non-automatic pumps with the added option of replacement motors. This feature allows you to carry a spare motor, providing an extra level of security and protection. Removal of the motor cartridge also allows for easy cleaning of the strainer and impeller area in the event that the pump becomes clogged with debris. Replacement motors are sold separately. 

RUL 20F Output at 0ft.: 800 gph Hose size: 3/4" I.D. Amp Draw: 2.8 Fuse Size: 5-amp Height: 4" Voltage: 12 VDC Rule's Cartridge Series of Bilge Pumps offers traditional operation activated by a float or panel switch. These are non-automatic pumps with the added option of replacement motors. This feature allows you to carry a spare motor, providing an extra level of security and protection. Removal of the motor cartridge also allows for easy cleaning of the strainer and impeller area in the event that the pump becomes clogged with debris. Replacement motors are sold separately.