Single Lens Dive Mask This mask has a single lens design that provides excellent vertical and horizontal field of vision. The robust but lightweight frame has a high quality liquid injection silicone double sealed skirt. The clear frame adds to the feeling of openess and reduces tunnel vision. This mask has no purge valve for those who believe they are a possible leak point and who prefer non-valve mask purging. Includes two piece mask box.  See Details

Single Lens Dive Mask w/Purge This mask has a single lens design that provides excellent vertical and horizontal field of vision. The robust but lightweight frame has a high quality liquid injection silicone double sealed skirt. This mask has a purge valve for hands off ease of purging. Includes hinged mask box.  See Details

Full Face Diving Mask Accommodates a standard regulator. Regulator is inserted into mask for unrestricted normal breathing and comfort in cold water. Mask will fit over the seal of our neoprene hoods, so that no portion of the body is exposed to water in extreme cold diving situations.  See Details

Full Face Mask Strap Three way replacement strap for DIFM61 full face mask. 

Neptune II Full Face Mask The Ocean Reef NEPTUNE II full face mask is ideal for use in extreme cold water conditions. The NEPTUNE II can use normal regulators, ones with a flow adjustment are best, and those that are over-injected are not recommended. The universal connection, (available in two sizes) with a DIN thread, allows you to connect the mask with most of the regulators on the market. The NEPTUNE II was designed not only for commercial & technical uses, but also for recreational ones. 

Waterproof Headlamp This inexpensive headlamp is waterproof to over 30 feet and so is perfect for use while dredging or during other activities around water or in pouring rain. The 4.8 volt bayonet type bulb is powered by four AA batteries (not included). An adjustable nylon stretch band fixes the lamp over your head, hood, or hat. The neoprene padded forehead mount is adjustable for angle. 

5 Finger Neoprene Gloves w/Strap Medium This five fingered neoprene glove has a cuff with wrap around velcro strap to help prevent water circulation. Palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. Size: Medium  See Details

5 Finger Neoprene Gloves w/Strap Large This five fingered neoprene glove has a cuff with wrap around velcro strap to help prevent water circulation. Palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. Size: Large  See Details

5 Finger Neoprene Glove w/Strap X-Large This five fingered neoprene glove has a cuff with wrap around velcro strap to help prevent water circulation. Palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. Size: X Large  See Details

5 Finger Neoprene Glove w/Strap XX-Large This five fingered neoprene glove has a cuff with wrap around velcro strap to help prevent water circulation. Palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. Size: XX Large  See Details

3 Finger Neoprene Mitt w/Strap Medium Heavy-duty 6.5mm neoprene lobster claw style mitt has a long cuff with wrap around velcro strap to help prevent water circulation. The palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. The three-finger design retains heat better than five finger gloves. Size: Medium  See Details

3 Finger Neoprene Mitt w/Strap Large Heavy-duty 6.5mm neoprene lobster claw style mitt has a long cuff with wrap around velcro strap to help prevent water circulation. The palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. The three-finger design retains heat better than five finger gloves. Size: Large  See Details

3 Finger Neoprene Mitt w/Strap X-Large Heavy-duty 6.5mm neoprene lobster claw style mitt has a long cuff with wrap around velcro strap to help prevent water circulation. The palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. The three-finger design retains heat better than five finger gloves. Size: X Large  See Details

3 Finger Neoprene Mitt w/Strap XX-Large Heavy-duty 6.5mm neoprene lobster claw style mitt has a long cuff with wrap around velcro strap to help prevent water circulation. The palm is coated for extra durability, but if used for dredging it is highly recommended that the working surface be coated with a thin layer of AquaSeal to greatly extend the life of the glove. The three-finger design retains heat better than five finger gloves. Size: XX Large  See Details

Neoprene Dry Gloves Medium Our warmest hand protection. Skin seals tighten over your neoprene dry suit wrist cuffs to help control seepage. Perfect for the coldest water diving conditions. These gloves are very supple and comfortable but the palm working area should be protected with AquaSeal or some other protectant to reduce premature wear is used for suction dredging. Size Medium 

Neoprene Dry Gloves Large Our warmest hand protection. Skin seals tighten over your neoprene dry suit wrist cuffs to help control seepage. Perfect for the coldest water diving conditions. These gloves are very supple and comfortable but the palm working area should be protected with AquaSeal or some other protectant to reduce premature wear is used for suction dredging. Size Large 

Neoprene Dry Gloves X-Large Our warmest hand protection. Skin seals tighten over your neoprene dry suit wrist cuffs to help control seepage. Perfect for the coldest water diving conditions. These gloves are very supple and comfortable but the palm working area should be protected with AquaSeal or some other protectant to reduce premature wear is used for suction dredging. Size X Large 

Neoprene Hood w/Zipper Medium This special 6.5mm neoprene hood designed for drysuit use in cold water and has a rear zipper for ease of donning. The 3mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 3mm material and is smaller than normal to allow for custom trimming, and has a smooth inner seal to help prevent water circulation. A unique vent design allows the release of air trapped at the top of the head, as often happens when air leaks past the neck seal of a drysuit. The body of the hood is 6.5mm neoprene sided inside and out with nylon. The zipper is in the back and has a 2mm inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: Medium-15" Neck, 22-1/2" Forehead Discontinued - limited to stock on hand  See Details

Neoprene Hood w/Zipper XXL This special 6.5mm neoprene hood designed for drysuit use in cold water and has a rear zipper for ease of donning. The 3mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 3mm material and is smaller than normal to allow for custom trimming, and has a smooth inner seal to help prevent water circulation. A unique vent design allows the release of air trapped at the top of the head, as often happens when air leaks past the neck seal of a drysuit. The body of the hood is 6.5mm neoprene sided inside and out with nylon. The zipper is in the back and has a 2mm inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: XX Large-18" Neck, 24" Head Discontinued - limited to stock on hand  See Details

Neoprene Hood w/Zipper Medium This special 7mm neoprene hood is designed for drysuit use in cold water and has a rear zipper for ease of donning. The 5mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 5mm material but uses TWIN-SKIN that is smooth inside and out. The smooth inner seal is to help prevent water circulation when used with a regular face mask. The smooth outer seal facilitates effective sealing when used with a full face mask. A unique vent design allows the release of air trapped at the rear top of the head, as often happens when using a full face mask. On the very top of the hood there is a radar and light reflective patch for added safety. The zipper is in the back and has an inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: Medium-15" Neck, 22-1/2" Forehead  See Details

Neoprene Hood w/Zipper Large This special 7mm neoprene hood is designed for drysuit use in cold water and has a rear zipper for ease of donning. The 5mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 5mm material but uses TWIN-SKIN that is smooth inside and out. The smooth inner seal is to help prevent water circulation when used with a regular face mask. The smooth outer seal facilitates effective sealing when used with a full face mask. A unique vent design allows the release of air trapped at the rear top of the head, as often happens when using a full face mask. On the very top of the hood there is a radar and light reflective patch for added safety. The zipper is in the back and has an inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: Large-16" Neck, 23-1/2" Forehead  See Details

Neoprene Hood w/Zipper X-Large This special 7mm neoprene hood is designed for drysuit use in cold water and has a rear zipper for ease of donning. The 5mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 5mm material but uses TWIN-SKIN that is smooth inside and out. The smooth inner seal is to help prevent water circulation when used with a regular face mask. The smooth outer seal facilitates effective sealing when used with a full face mask. A unique vent design allows the release of air trapped at the rear top of the head, as often happens when using a full face mask. On the very top of the hood there is a radar and light reflective patch for added safety. The zipper is in the back and has an inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: X Large-17" Neck, 24" Forehead  See Details

Neoprene Hood w/Zipper XX-Large This special 7mm neoprene hood is designed for drysuit use in cold water and has a rear zipper for ease of donning. The 5mm neck has smooth inner seal, designed to help seal to the neck seal on most drysuits. The face opening is also 5mm material but uses TWIN-SKIN that is smooth inside and out. The smooth inner seal is to help prevent water circulation when used with a regular face mask. The smooth outer seal facilitates effective sealing when used with a full face mask. A unique vent design allows the release of air trapped at the rear top of the head, as often happens when using a full face mask. On the very top of the hood there is a radar and light reflective patch for added safety. The zipper is in the back and has an inner neoprene gusset to prevent water circulation thru the zipper. For extreme conditions, use with an Ice Cap. Size: XX Large-18" Neck, 24-1/2" Forehead  See Details

Weight Belt - Black Heavy nylon 2" by 58" long webbing for lead weights used in diving, equipped with a stainless steel quick release buckle for safety and ease of fastening.  

Heavy Duty Weight Belt Buckle This extra heavy duty stainless steel weight belt buckle will not pop apart like some less expensive buckles when they are subjected to the stress of the heavy lead weights used in mining and other industrial diving activities.This buckle has three webbing slots. 

5 lb Weight Mold Make your own diving weights. Great for anyone with access to waste lead, especially in areas where being sent lead weights would be very expensive due to shipping costs. If topped of makes 5 pound lead weights. Will make smaller weights by simply pouring in the appropriate amount of lead.  

15 lb Weight Mold Make your own diving weights. Great for anyone with access to waste lead, especially in areas where being sent lead weights would be very expensive due to shipping costs. Will make smaller weights by simply pouring in the appropriate amount of lead.