1/4" Cable for Uniprobe Replacement headphone cable with 1/4" male jack for Uniprobe or Nugget Buster NDT headphones. 

Garrett Master Sound Headphone A basic inexpensive headphone for use with any brand metal detector with standard 1/4" jack. Well cushioned headband and ear cups for extra comfort. Includes stereo/mono switch to adapt to any type detector. Features dual volume controls to individually adjust for each ear. The reinforced 10 foot coiled cord has a right angle 1/4 inch plug that helps prevent the headphones from accidentally pulling loose from the detector. 8 ohms impedance per channel with a frequency response og 30-18,000 Hz. This set is perfectly adequate for most coin and relic hunting, but nugget hunters focusing on faint signals should look at the higher performance units. List Price $29.95  See Details

Detector Pick w/16" Handle Lightweight compact pick that really digs. A well balance pick that works great for crevicing, metal detecting and much more. Built with a spring steel head with a heavy duty fiberglass handle and a foam rubber grip. Equipped with a super strong rare earth magnet mounted on the head that quickly removes metallic items from the working area. The magnet has a steel retaining ring welded around it to protect it. 16" handle, weight 1.5 lbs.  See Details

Detector Pick w/24" Handle Lightweight compact pick that really digs. A well balance pick that works great for crevicing, metal detecting and much more. Built with a spring steel head with a heavy duty fiberglass handle and a foam rubber grip. Equipped with a super strong rare earth magnet mounted on the head that quickly removes metallic items from the working area. The magnet has a steel retaining ring welded around it to protect it. 24" handle, weight 2.5 lbs.  See Details

Original Gray Ghost Headphones The Original Gray Ghost was DetectorPro's first deluxe headphone and it is still their most popular for the demanding professional coin, relic, and jewelry hunter. These phones are custom designed specifically for metal detector users. Single volume control for single hand adjustment, stereo/mono switch, signal limiting circuitry to protect hearing from high volume hits, and sound-blocking design eliminating noise up to 24 decibels. 150 ohms impedance.  See Details

Nugget Buster NDT Headphones Does this sound familiar... A month of research and you’ve just hiked a mile into the desert after pinpointing an old claim site on an old map. You can only afford to carry one set of quality headphones. As you setup your detector and power on, you hear nothing! Suddenly you remember back at the car when the door caught and yanked your headphone cord really hard. Luckily you packed mini-phones, but they have an 1/8" plug and you lost the adaptor! Now you’ll have to settle for using the loudspeaker to hear the deepest nuggets, old coins and relics... That is if your detector has a built-in speaker!
If this has happened to you, you already know the value of having a good backup. Our universal Nugget Busters NDT® headphones are based on the strong features of our already famous Gray Ghost® headphones. We have added dual volume controls and for the Nugget Busters NDT, we have engineered a very rugged detachable cord with a high-quality connector system and we give you TWO complete cords with 1/4" plugs! If one cord goes bad, just plug in your backup.
So next time you plan on a serious day of metal detecting, don’t take chances, bring the Nugget Busters NDT.  See Details

Sun Ray Pro Gold Headphones Sun Ray Detector Electronics is pleased to announce a new upgrade to our already very popular Pro headphones. This upgrade results in an improvement to our Pro version and is referred to as the Sun Ray Pro Gold. The "Gold" features a new soft leather headband and soft leather muffs as well as a new brilliant gold Sun Ray logo w/gold bar added.
The new foam padded soft leather muffs are not only more comfortable than the earlier vinyl muffs, they do not develop a "memory". They conform to the shape of your head around your ears when worn and when taken off return to their original shape! Vinyl which normally has a life expectancy of (3) three years can get harder with time, and the elements, which can cause a less comfortable fit as well as a noticable increase in ambient (outside) noise. The old Sun Ray Pros yielded a 24 decibel reduction in ambient noise blocking ability when new. The new Sun Ray Pro Gold version yields a 26 decibel reduction in ambient noise blocking abiltiy and continues to block that noise day in and day out, year in and year out because they stay soft and comfortable! All of the other features that the earlier Sun Ray Pro version had remain the same features on the "Gold" version with the same limited lifetime warranty.
High output 150 ohm (nominal impedance) speaker elements which are certified as hearing aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum case construction with polymer cones for moisture and sweat protection. Dual 32 position "segmented or detent" volume controls Limiter circuit on/off switch. (Reduces loud blasts from surface targets, while allowing the faintest of signal responses to be clearly heard.) Mode selector switch makes the new Sun Ray Pro Gold compatible with most metal detectors. Toggle switch rubber boots keep moisture and dirt out of toggle switches! Comfortable, lightweight leather muff dual swivel point ear cups and adjustable leather headband. One of the industries most durable coiled cables with external strain relief and 1/4" right angle, molded gold plated plug.  See Details

Uniprobe Headphones/Probe The first compact all-in-one probe/headphone/pulse inductance metal detector in the world famous DetectorPro design. UniProbe is a new high-powered pulse inductance probe that can be switched on or off during hunting and retrieval with your metal detector... Or it can be used just as a set of high-quality detector headphones... Or with an optional PI searchcoil and rod, it can be turned into a complete PI metal detector! Not only does this probe contain today's most innovative Pulse Inductance electronics, it is the first probe that has all the electronics built into the headphones. All of this is possible because of our innovative microcircuitry and packaging. The UniProbe has been engineered to perform in all ground minerals and on both salt and fresh water beaches too with up to 5-6" depth on coins in the retrieval hole. UniProbe is a true universal application probe/ metal detector and will open up a whole new world of accurate retrieval for you. Too many valuable coins, relics and jewelry are damaged everyday by the detectorist's inability to accurately pinpoint with large searchcoils. Isn't it about time you stopped damaging your treasures? Controls: Pulse Frequency, Threshold, headphone volume. Switches: Detector Compatibility; Probe On/Off. Connectors: Left cable for headphone connection to your detector. Right cable for probe searchcoil or optional 11" DetectorPro PI searchcoils. List Price $350.00  See Details 

Falcon Gold Probe MD20 The Falcon Gold Probe is a very lightweight and inexpensive gold detector. It is extremely sensitive to very small gold, much smaller than can be detected with normal nugget detectors. With sensitivity as small as 2/100 of a grain, it can basically detect any gold visible to the human eye. The Falcon MD20 only has two controls, and so is very easy to operate. The main drawback to the unit is the very small area that it scans. For very small gold the effective scanning area is about an inch wide by and inch deep. Larger gold may be detected a bit deeper, but very small gold is really what this unit is made for. You would therefore not use the Falcon like a regular nugget detector. It excels at specific uses. Two of it's best applications are scanning quartz samples for enclosed gold, and tracing crevices in bedrock for sniping. The unit could pay for itself quickly in a crevicing operation. The Falcon MD20 comes complete with control box and waterproof handheld probe. The unit has a built-in speaker, but may also be used with 1/8" jack headphones (not included). The Falcon Gold Probe comes complete with a one year limited warranty.
Please note that the Falcon is not a "gold only" detector. It detects any conductive items and so has uses for anyone looking for tiny metal items. But there is no ability to differentiate between different metals.  See Details

Handle for Falcon MD20  

Holster for Falcon MD20  

Garrett Pro-Pointer The PRO-POINTER is intended for use in conjunction with a ground search metal detector to aid in the recovery of metallic targets. The Garrett PRO-POINTER has both audible and vibrating alarms to indicate the presence of metal objects. The alarms increase in intensity as the PRO-POINTER is moved closer to the metal target. With a pinpointing tip plus a scraping blade with side-scan capability, the PROPOINTER is very effective in easily detecting even the smallest of metallic objects. An LED flashlight assists in dark and low light conditions. The PRO-POINTER has an IP 66 standard waterproof rating, fully protecting it from the environment and allowing it to be washed under running water or operated in the rain. The PRO-POINTER will provide years of reliable operation even in rugged environments. Microprocessor circuitry allows the PRO-POINTER to operate at maximum sensitivity without any need of adjustments. The Garrett PRO-POINTER is ideal for the recovery of small items in a wide variety of hunting conditions, ranging from highly mineralized ground to saltwatersaturated sand. You will find the Garrett PRO-POINTER to be an indispensable tool to: • Speed target recovery; • Accurately find small objects; • Prevent digging large holes; • Identify multiple objects in near proximity; • Search in tight interior areas such as walls and ceilings; • Serve as a utility pinpointer for locating metal pipes, conduit, rebar and control boxes; and • Locate nails and metal wall studs in homes.  See Details

Plastic Nugget Scoop This tough plastic scoop is the answer to locating small nuggets in a pile of soil. Scoop and wave material over coil... a signal indicates the target is in the scoop. By removing material and rechecking the scoop, it is easy to rapidly recover even the smallest bits of gold. Eliminates the problem with sensitive detectors actually picking up your hand! The scoop is also great for cleaning out pockets and crevices. 12.5" long x 3.75" wide.   See Details

Black Plastic Trowel This plastic digging trowel is handy for separating small targets from soil. The non-metallic construction allows it to be passed over the detector searchcoil to test for gold. 11" long x 3" wide. 

Tubular Steel Trowel Steel tube cut at diagonal and coated for rust protection. Add a comfortable vinyl grip handle, lanyard, and rust preventative coating and you have a great crevicing tool. 14" overall length.  

Minelab Digging Tool Minelab's new digging tool is made from strong painted steel with a cutting edge to help you dig in some of the harder soil types. Total overall length including the handle is 12" and the blade is 7.5 x 2". Built in blade guard with rubber grip. Sheath included. 

Lesche Digging Tool w/Sheath This double-edged digger has a saw tooth edge on one side of the blade to cut through roots and a blade on the other to cut through tuff grass and dirt. The Lesche digging tool has a comfortable rubber grip handle with hand guard plate. Will cut plugs in soil quickly. The digger is 12" overall and made in the USA out of Chrome-Moly steel. Comes with a Cordura belt sheath.  See Details

Metal Handle Detector Pick This nice little detector pick features a tubular steel handle with rubber grip. The handle is 15 inches long and there is a loop incorporated into the rubber grip so you can tie the pick to your belt or pack. The flat steel head is 7-1/2" long across the top and 1-1/2" wide. One end widens to 2" for digging, and the other has four tines for scraping. The pick is painted with durable tuffcoat paint.  See Details

Hodan Pick 15" Handle A classic prospector's pick. This pick features a 12" tempered carbon steel head on a strong hickory handle. The head is zinc plated to resist rusting. The handle is both wedged AND pinned to the head. A button magnet is firmly screwed to the end of the handle. Quick use of the magnet makes separation of small iron trash easy. Perfect for the prospector and nugget hunter.  

Hodan Pick 22" Handle A classic prospector's pick. This pick features a 12" tempered carbon steel head on a strong hickory handle. The head is zinc plated to resist rusting. The handle is both wedged AND pinned to the head. A button magnet is firmly screwed to the end of the handle. Quick use of the magnet makes separation of small iron trash easy. Perfect for the prospector and nugget hunter.  

Hodan Walking Pick This pick features a 12" tempered carbon steel head on a 35" long hickory handle. This unit is great for those who do not like to bend over, and the extra long handle doubles as a walking stick in rough terrain. It's intended use as a walking stick means this pick does not have the magnet on the end of the handle like the Hodan picks above.  

Nylon Pick Holder  

Leather Pick Holder  

Nylon Equipment Belt  

Super Magnet  

Galvanized Sand Scoop w/Grip This heavy-duty sand scoop is constructed of tough galvanized steel and is 8-3/4 inches long with 5/8 inch diameter holes. The handle has a knobby rubber grip. Great for sifting items from sand or small gravel. It is essentially a galvanized version of the Heavy Duty Yellow Sandscoop.