An Employee Owned Company

Sun Ray Probe XLT/Pro/Classic

Online Store < Metal Detecting Equipment & Supplies < White's Detector Accessories < Sun Ray Probe XLT/Pro/Classic
 

Sun Ray Detector Electronics is proud to announce our new Invader series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader XL-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT and other users with models operating with 6.592 khz, including the Eagle series, Spectrums, Pro XL, Quantum XT, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I, II & III S/L, etc. The XL-1 is precision built to ensure peak performance on those models! We have received many requests for in-line target probes by White's users for several years due to the popularity of our quality in-line probes for other brands. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the XL-1:

Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft. The XL-1 probe and cable weigh approximately 6 oz. The XL-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total!
While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
The XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance!
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs).
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
The XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Complete installation & operation instructions included. FULL 12 MONTH WARRANTY!!