Fisher Gold Bug 2 Gold Nugget Detector

The Fisher Gold Bug 2... extraordinary sensitivity, ultra-high 71kHz operating frequency, iron discrimination, dust and moisture resistance, audio boost and the ability to operate in highly mineralized soil. Using low-noise, precision-matched, temperature-compensated components and state-of-the-art circuitry, the Gold Bug 2 takes prospecting to a new level - 71kHz - the highest operating frequency on the market. The result: increased sensitivity to smaller nuggets in highly mineralized soil.

	Powerful 71 kHz operation for extreme sensitivity to small gold nuggets
	"IRON DISC" mode for hot rocks and iron discrimination
	Three auto-tune modes with two retune speeds for nugget hunting in almost any ground condition
	Only 2.9 lbs. complete with foam grip and cushioned arm rest
	Converts to hipmount or chestmount

	Conceived, designed, engineered and manufactured specifically for today's electronic prospector
	Standard 10 inch waterproof elliptical search coil. Optional 6.5 and 14 inch coils
	Sealed panel and speaker design for dust and moisture resistance
	Faint-target, audio-boost mode
	Uses two 9V batteries (included)
	2 Year Warranty

Fisher Gold Bug 2

Buy a new Fisher Gold Bug 2 w/10" coil (List Price $879.95) and receive a FREE set of Gray Ghost Headphones! These are not the cheap phones you get with many detector packages but a true set of professional headphones ($99.00 value). Plus Alaska Mining & Diving Supply is adding FREE Insured Priority Mail Shipping & Handling (approx. $30 total retail value)!

AMDS Price $703.95 - You SAVE $305.00!
FREE SHIPPING if ordered on website - See details here

	6.5" Elliptical Coil - Gold Bug 2 This accessory coil for the Gold Bug 2 is more sensitive on small gold at the expense of a slight depth loss on larger gold. Perfect nooks and crannies in bedrock, this little coil will also handle mineralized ground better than larger coils. These small coils are epoxy filled and so are very resistant to false signaling and general abuse. For Gold Bug 2 only; will not work on Gold Bug. Part#FI203439100 $143.95 Plus $3.00 S&H if ordered on website - See details here
	14" Elliptical Coil - Gold Bug 2 This accessory coil for the Gold Bug 2 will give you more depth on larger gold and covers more ground, at the expense of a slight sensitivity loss on smaller gold. Ideal for tailing piles and other areas where larger nuggets may be found. For Gold Bug 2 only; will not work on Gold Bug. Part#FIAF0067 $164.95 Plus $5.00 S&H if ordered on website - See details here
	Coil Covers for Gold Bug 2 Coil covers protect the bottom of the search coil from wear and tear. These thin plastic covers simply snap in place and sacrifice no depth or sensitivity. If you ever wear through the cover, simply pop it off and replace it. Three sizes fit both Gold Bug models. 6.5" Coil Cover Part#FI203248 $7.00 Plus $1.00 S&H if ordered on website - See details here 10" Coil Cover Part#FI202319 $8.00 Plus $1.00 S&H if ordered on website - See details here 14" Coil Cover Part#FI203320 $9.00 Plus $1.00 S&H if ordered on website - See details here
	Cordura Holster for Gold Bug 2 This heavy cordura nylon holster is designed to protect your Gold Bug 2 control box while it is being hip or chest mounted. The holster has it's own belt loops so you can hip mount the control box. The same loops can be used to mount the holster to the chest harness strap below. The flip over cover attaches down with a velcro pad and protects the controls but is easily opened to make adjustments. A notch in the cover allows for headphone use while your unit is being protected. A hole in the bottom of the holster allows the coil cable to be attached to the control box and allows the threshold control to be adjusted. Part#FI103696 $18.95 Plus $1.00 S&H if ordered on website - See details here
	Fisher Chest/Hip Harness for Gold Bug 2 Body mounting your metal detector control box can help protect your detector and alleviate possible arm strain from long hours of metal detecting. This can be of extreme importance for anyone suffering from tendonitis. Body mounting also works well work working in steep terrain or while wading in deeper water. This nylon harness can be used to hip mount your detector or by shortening the straps chest mount the control box. A short snap-on section allows the control box to be easily removed from the harness without actually removing the harness from your body. The oversized plastic quick buckle allows for easy donning. This harness may be used with any detector featuring built-in belt loops as do the Fisher Gold Bugs. The cordura holster above also works well with this harness to provide the control box with extra protection. Part#FI2029101 $21.95 Plus $1.00 S&H if ordered on website - See details here

Check out our other Metal Detector Accessories

www.fisherlab.com

Fisher Gold Bug 2

AMDS Price $703.95 - You SAVE $305.00!FREE SHIPPING if ordered on website - See details here

AMDS Price $703.95 - You SAVE $305.00!
FREE SHIPPING if ordered on website - See details here